Categories

Contact Us

Add:1420-287, Guangyi Rd, Wuxi, Jiangsu Province, China
Contact: Mr. Zhang
Tel: +86-510-82605366/+86-510-82609866
Mob: +86-13358115366
Fax: +86-510-82609866
E-mail: sales@handabearing.com

Installation Of Four Row Tapered Roller Bearings

- Aug 17, 2017 -

One or four row tapered roller bearing inner ring with the roll neck of the general is the gap, the installation of the bearing into the bearing box, and then the bearing box loaded into the shaft neck.


The outer ring of the two or four row tapered roller bearing and the bearing box hole are also applied to the bearing box. The outer ring, inner ring and inner and outer ring of the factory are printed with the character {Hottag} symbol, which must be installed in the bearing box in order of the character symbols. Cannot be interchanged arbitrarily to prevent the bearing clearance from changing.


Third, all parts are loaded into the bearing box, the inner ring with the inner ring, outer ring and outer ring shaft.


Measuring the gap width between the end face of the outer ring and the cover plate of the bearing box to determine the thickness of the corresponding gasket.

Multi-seal bearings with the post code XRS symbol.


  • Thrust Tapered Roller Bearing T-511 TIMKEN T511
  • Deep Groove Ball Bearing 61926 for Machine Spindle
  • SKF Angular Contact Ball Bearing 7314 BECBp for Hybrid Heat Exchanger
  • NSK Thrust Ball Bearing 51110 for Blister Machine
  • FAG Self-aligning Ball Bearing 2313K for Nailing Machine
  • FYH Pillow Block Bearing UC205 for Concrete Machinery

Related Products